TruPress Non-Annealed 316 Stainless Steel Piping 6m Length
Price range: $159.54 through $3,177.36
Infinity™ Compressed Air Aluminum Pipe Is Available In Diameters 1/2″ (14mm) To 8″ (220mm). Fully Extruded Powder Coated Blue Aluminum Pipe.
- Description
- Additional information
Description
TruPress Non-Annealed 316 Stainless Steel Piping 6m Length
Press Fitting System Series 22mm TO 168mm Flow Rates
The TruPress, Press Fitting System provides a comprehensive solution for joining tubing for fluid and gas systems through mechanical press connections.
TruPress uses the M-Profile press connection method. The pipe is inserted into the fitting to the proper insertion depth, then pressed using an approved tool with the correct jaws or collars. This creates a dual-plane compression that forms a strong mechanical joint and maintains a reliable, permanently elastic seal at the O-ring.
Pipping and Tubing
TruPress stainless steel tubing is longitudinally welded, thin-walled pipe available in 316L and 304L materials.
Max Pressure: 232 psi
Max Temperature: EPDM seal: 248°F | FKM seal: 428°F
Pipes are supplied in 19’-6” standard lengths with end caps to prevent contamination. All tubing is free of annealing color and surface impurities for optimal corrosion resistance and clean installation.
Pressing Tools and Equipment
Pressing must be performed with approved TruPress-compatible tools.
• 1/2”–1-1/4”: Press using jaws
• 1-1/2” and larger: Press using collars or chains
Pressing should only be done within the following ambient temperature ranges:
• Battery tools: 14°F to 104°F
| Description | Part Number |
|---|---|
| 15mm Pipe 316L N/annealed | TS1-15-316-NA |
| 22mm Pipe 316L N/annealed | TS1-22-316-NA |
| 28mm Pipe 316L N/annealed | TS1-28-316-NA |
| 42mm Pipe 316L N/annealed | TS1-42-316-NA |
| 54mm Pipe 316L N/annealed | TS1-54-316-NA |
| 76mm Pipe 316L N/annealed | TS1-76-316-NA |
| 88mm Pipe 316L N/annealed | TS1-88-316-NA |
| 108mm Pipe 316L N/annealed | TS1-108-316-NA |
| 168mm Pipe 316L N/annealed | TS1-168-316-NA |
TruPress is suitable for a wide variety of fluid and gas systems including:
• Potable and treated water systems (EPDM)
• Hydronic heating (EPDM)
• Cooling and refrigeration (EPDM/FKM)
• Compressed air and inert gases (EPDM/FKM)
• Natural gas and LPG (HNBR)
• Solar, vacuum, and steam service (FKM or white seals)
• Fire protection and sprinkler installations (EPDM, above-ground only)
